As another Lame Cherry exclusive in matter anti matter.
I was pondering the work of a professor at a no name college in America who once had posted online how to make an EMP weapon. No you do not need a nuclear bomb to make EMP, as the US military has been creating EMP pulse weapons to fry circuits in the Iraq wars.
There is not that immense Einstein brain gap to stump people in how to build advanced defensive weaponry. It is as old as Tesla and Marconi.
The professor just over a decade ago, basically described an EMP gun, which was a conductive bar in the center, explosive packed from the rear to the front, small coils of wire wrapped around this bar, with larger diameter wire wrapped around this outer coil.
Electricity was hooked up to the large wire and the small wire to complete the circuit. To make the EMP work, the professor taught that one simply detonated the explosive, which would collapse the magnetic field, amplify it in the small wire, which then collected it at the center in the bar, where it was released as an EMP.
Those who know of electronics in the old automobile coils, will recognize this as the old coil in gasoline engines, which fired sparkplugs.
I have always stated that there are no terrorists in this world, or they would build all types of these rudimentary charge devices, and cause all sorts of hell on earth causing billions of dollars in damage. The mere reality that no one ever built the professor's EMP reveals how all these terrorists work for the cartel and only act against certain things, which never cause financial distress against the mega rich who own all of these systems.
I was considering these drones that are going to become a plague, and you children and brats really require education on these offensive devices.
The military in drones, have double systems to make them function. There is the microwave satellite system and there is the electronic communication system.
The electronics are jammed by a simple coil which is nothing but a small motor with metal posts attached which are not grounded, which in being spun arc across to 2 to 6 posts in a wheel, and create a spark like a sparkplug.
This type of device is 19th century technology and is what Marconi used basically for his long distance Atlantic communication tests. These things are illegal now as the regimes of the world become upset when these electronic sparks are set up, as it jams all communications.
If you have ever heard a radio going click click click when an old tractor without resistor sparkplug wires, that is what this basically is.
Microwaves are the same type of system, as a basic dish antenna will broadcast a jamming signal that a satellite would use to communicate with a drone for GPS positioning.
See drones have a homing direction, where if communication is disrupted, the drone flies back to base. The Iranians were not shooting down American drones, but instead were just jamming signals in these basic ways to capture US drones and remanufacture them.
The Serbian genius, Israelite American, Nicoli Tesla, was the inventor of some of the most advanced electronics in the history of mankind. His Tesla coil was pure inspiration. The basics of it were a large coil and a small coil, where when the fields broke down, the electic bolt would arc between the two.
For some reason the propaganda placed online by Mockingbird states that the Tesla coil is inefficient in it loses power due to atmospheric resistance. That is true, but if the system operates in a vaccum, then it is pure energy without loss. To put this simply, when the oil barons can make oil and gas pipelines stretching thousands of miles, it is not that difficult to put a vaccum tube underground, to transfer electricity from point A to point B without energy loss.
Energy loss for those who are not aware, and if image Obama and all the green frauds were really interested in cheap electricity, would state the case that half of the electricity generated in America is lost in the powerlines, as the wires produce resistance and it requires twice as much electricity to reach your house to get the charge you utilize. All that is required is vaccums and superconductors.
Wow another Lame Cherry exclusive in matter anti matter. America has more than enough powerplants, all that is needed is efficient transfer of that energy from point A to your home.
This though is not about powerline transmission, but the theory of the Drone Silencer.
The Lame Cherry Drone Silencer though is........well in basic form is just a shotgun loaded with Number 7 birdshot for those little window lurkers which are appearing. That might get city dwellers in trouble, so perhaps you have heard of nylon line for fishing which is clear and invisible. Yes a loose passive net, will capture the problems just like birds. Think a little bit on things in drones can not fly through walls or trees. So you have travel lanes they will fly through and in to. Danglers hanging down cause more problems as these little suction engines suck things and for some reason they just do not operate very effectively with plastic twine wrapped in them.
Now that I have culled off the idiots at intelligence and the brain dead with that simple countermeasure, we now return to the Drone Silencer.
All that is required is the same professor's coil, but leave out the big bang theory, as that is not cost efficient. You want to recreate your old 57 Chevy car coil. Instead of the explosives though, one might simply open the points gap with a switch, this creates the high charge, but on the end of the coil, one places a box antenna which is attached by a coil wire like in a car or a heavier cable, and one would aim the antenna at the drone, frying it's circuits.......and if you realize something now, you did not require an electronic signal jammer nor a microwave jammer. Fry the circuits and the bird succumbs to gravity.
As this blog exclusively reported in Lame Cherry matter anti matter, those drones which appeared on the White House lawn, were knocked down by signal jammers. The demon technology UFO's were knocked down by radar blasts being utilized in America at the end of World War II. This is all about electronics and those who are advancing the demon machine. They do not attack their own or it costs them money. They attack you, and make you pay for them for the war the police state they bankrupt you with tracking their terrorists.
I have something floating in my brain which would be a really interesting pulse weapon based on Tesla's technology. That I will not share here as that could be really dangerous. All things though are to be remembered like guns, in they are always loaded and you do not point them at anything as they are charged energy being released.
This though is all theory of course and just a private conversation between myself. I might say to myself that swatting a drone on my property might get me really popular as while the police have no regulations to protect people from being assaulted by drone surveillance from satan knows how, I would be certain if you knocked down a bird with a silencer, that all sorts of alphabet agencies would appear, stating they have rights to destroy your Constitutional Rights and you have none.
I am still trying to conclude what the mysterious vial on my stop sign is doing there..........
I quit this with a few posts from other sites in their discussions of electronics.
Oh by the way, what did your wee minds contemplate this day.
nuff said.
agtG
silencer 1
A simpler and far more effective solution might work like this: A stationary spark gap like this one http://img81.imageshack.us/img81/8670/sparkgap.jpg fed by a high voltage capacitive discharge (warning!!!! VERY dangerous,deadly in fact if you touch any part of the circuit while active and even for several hours later),in turn fed to one end of an old T.V. antenna ,the other end attached to a good earth ground, ought to drop those monstrosities like mallards during duck season.Placing powerful neo magnets across the gap in a North-South configuration will interrupt the spark very abruptly and create spikes an order of magnitude greater than without them(an old Tesla trick). The frequency can be adjusted by the distance between the gap.Of course I must insist you don`t try this for any reason because of the obvious danger and illegality of it all,
silencer 2
Spark gap transmitters are the oldest type of radio transmitter made by man. They were first used around 1888 and remained legal until the 1920s when their use became greatly restricted. World War II delayed their complete ban outside of emergency communications for a few years. Now the only way to use them legally is inside a faraday cage. They operate as jammers for the same reason they were banned, they take up a lot of the radio spectrum.
A spark gap transmitter is fairly simple. Send a high voltage current through an air gap, when the resistance of the air breaks down a spark will cross the gap. When this happens electromagnetic radiation is emitted. You can test this in your house fairly easily. Turn on some speakers so they are powered but nothing is coming out of them. Computer speakers that are on will work as will a stereo set to CD or tape with no CD or tape playing. Flip your room lights on and off in rapid succession, you should hear a clicking from the speakers. The clicking is RF energy that is being picked up from the light switch.
Effective Range
The range of this type of jammer is based on a few properties.
Antenna resonance
Field strength
Modulation
Terrain
The antenna of this particular device will be more resonant on one frequency than others. As a result there will be more RF energy on that frequency, and harmonics or multiples of that frequency. The range for this frequency will be further than others. Using multiple antennas will cause the transmissions to be greater on more frequencies.
The field strength, or amount of RF energy given off, is directly related to the difference in voltage between the two states. With the type of transmitter we are making one state will be totally off or 0 volts while the other will be on or the full voltage. It is not required to switch between an off and on state you may switch between a lower and higher voltage as well. The higher the input voltage the stronger the RF, the more range you will have. You have normal free space losses that all radio transmissions have which means that in order to double the effective range you will have to apply 4 times more power.
Another consideration is the modulation that is being utilized. Modulation also includes some of the data that is carried over that mode such as digital data. FM signals for example will lock onto the strongest relative signal from the receivers point of view, a weaker but closer signal will appear stronger than a further but more powerful signal due to free space losses. FM can flip back and forth quickly between two stations that have a nearly equal signal strength at the receivers antenna and make it appear like it is mixing the two stations, the reality is that it is not. SSB will mix the two signals, while you may hear noise in with the desired audio you can still hear the desired audio. Spread spectrum will tolerate the most noise.
Digital systems can be jammed even if the underlying modulation is not by introducing noise the decoding circuitry in the radio may not be able to decipher the bits correctly and reconstruct the message. This can result in heavy packet loss on that system rendering it unusable. Many digital systems are more sensitive to noise than their less sophisticated counterparts. Many digital systems are either FM or spread spectrum. FM is more often used for longer range applications.
The specific type of system that you are trying to jam is important to know as it will tell you how much power you have to have and at what distance. The best way to determine what is suitable is to get a similar system and see how far it will work from the spark gap transmitter at a given power.
Terrain includes buildings, trees and other objects that the radio signals will interact with. If you stash the spark gap transmitter in a metal box the signal will be attenuated compared to that same transmitter being placed in an open field. Elevation can also influence the distance the signal may go.
Construction
The construction of this type of spark gap generator is fairly simple. You should be able to get everything for under $50 new, used items may be even less expensive. You will need the following items:
high voltage source
batteries
small bit of wood to mount things on
small motor
a few nails or screws
wire
The high voltage source could be an automotive ignition coil. This takes the battery or alternator output and makes the voltage much higher so that it will jump across the electrodes of a spark plug igniting the fuel. A spark plug is a spark gap, although it is not suitable in its current form as a radio jammer, it could be made into one.
The battery should be suitable to run your high voltage source and the small motor. A motorcycle battery is smaller but will go dead faster than a larger car battery.
The wood should be large enough to let you mount the ignition coil, motor and screws on. This can be any scrap wood or similar non-conductive material that you can find. It should be rigid enough that the components will not just fall apart although it does not have to be that strong. It’s purpose is just to hold everything together. A block of cheese or dried mud would work if that is all you have available.
The small motor can be anything from a vibrator out of an old pager or mobile phone, an electric fan or one you may find at an electronics or hobby store. It just has to have a shaft that allows mounting of a cross member onto.
The first step will be to assemble the motor so that it will function the way you want. When mounting the cross member you should make sure that it is insulated from the rest of the motor either by a plastic shaft or a plastic mounting block. The rod can be a nail although you will want it equidistant from the center.
sparkgap-motor-block.jpg
You can see how the metal rod goes all the way through the plastic insulating block. You may install either one rod all the way through or two rods forming an X. If you install two rods you will have twice the sparks and thus the transmission cycle will be twice as great.
sparkgap-motor.jpg
Once the insulating block is mounted on the motor you should affix two other nails or screws on either side so that they almost touch the cross members you installed in the previous step. You do not want them touching but you do want them as close as possible. The closer the better. You should connect the motor to your battery and ensure that it can spin correctly with no problems and that it does not vibrate itself off of the wood.
Now prepare your antenna. This is a length of wire cut to 1/4 wavelength of the desired target frequency. If you do not know the target frequency you can just make some guesses. You can also connect multiple antennas together to cover various frequencies. Remember you will have RF emitted on all frequencies it will just be more powerful on the frequencies that the antenna is resonant for. Mobile phones are about 0.5 inch antennas and older police radios are 2.86 inches. For a good spectrum coverage if you make antennas of 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0 inches most of the usable spectrum will be covered.
Connect the antenna(s) that you made to one of the stationary side rods. To the other end you will need to connect a ground. This can be to a metal water pipe in your house or to a rod driven into the ground. If you do not have a ground the radio will still transmit although it will be at a slightly lower power.
Now connect the output of the ignition coil to the stationary rods on either side of the motor. Connect the negative terminal to the ground side and the positive terminal to the side with the antenna(s). The idea here is that when the motor spins current will pass from one rod to the other and out the antenna. The motor will switch the output of the coil on and off in rapid succession.
The last and final step is to connect the battery to the motor and the coil. You may optionally install a switch to turn the device on or off or you may just disconnect the battery.
Remember building this is not illegal (in most places) but using it is. You will be causing harmful interference and probably upsetting people.
Military drones use redundancy control systems. Although it is common for line of sight radio transmission, they are backed up and usually, primarily controlled by a direct satellite link. This can also be jammed using a standard satellite dish from your rooftop. You must jam both and override its GPS “return home” autopilot when it loses connection. I would suggest that this is better for jamming communication in an emergency more so than drones. A quick Google search well give you details on jamming the sat link.
diathermy machine
