Wednesday, June 19, 2024

Titanium Hull

 



As another Lame Cherry exclusive in matter anti matter.


I was listening to Tom Carey on Rense, in Mr. Carey is someone who has invested decades in investigating the UFO or Roswell and other UFO events. He spoke to numbers of witnesses or family and friends of this incident. It was fascinating that the vehicle had no moving parts, and was made, contrary to what I had heard in being mostly titanium with beryllium found in the hull of this craft, to the entire craft.

I do not discount nor debunk. My examination  is always, "Why is it this way?" to attempt to ascertain what was taking place.

For a short course in this, what is often reported are electrical problems and reverse polarity in appliances exposed to these craft.

We are told that this craft was maneuvered by placing hands in slots for hands.

We are told that these creatures are telepaths.

In basing on that information, the conclusion would be, that these are electronic aircraft, which have a powerbase something like electronic coils in no moving parts, which produce electromagnetic waves, which moves the craft through time and space.

The entire ship then is an extension of the pilot's mind. It is like a radio receiver, and it's legs for mobility are these waves moving across the surface.

In stating that information, the examination of titanium with a beryllium addition, honestly is what a craft should be constructed of, which would be an extension of thought process.


The links explain the benefits of titanium.


Oct 9, 2019 ... In a Fujii clinical study, patients with titanium implants experienced balance problems due to the amplification of ...

Jul 23, 2020 ... Now, engineers at Drexel University have found that a 2D material called titanium carbonitride is an excellent ...




Titanium (Ti) implants are increasingly being used for dental parts. There is no problem with the attraction of a static magnetic field for Ti in magnetic resonance imaging (MRI), since Ti is paramagnetic. However, there is a risk of radio frequency (RF) heat generation within Ti. 3.0 T-MRI scanners are becoming increasingly common. The specific absorption rate (SAR) of 3.0 T-MRI is quadruple that of SAR compared with 1.5 T-MRI due to its being proportional to the square of the strength of a static magnetic field. The effect of heat generation in 3.0 T-MRI can thus be greater than in 1.5 T-MRI. So, using 1.5 T and 3.0 T-MRI scanners, we measured the temperature of several Ti implants using the same scanning parameters during MRI scanning. Our measurements showed the rise in temperature of the Ti implants to be a maximum of 0.4 degrees C. In this study, however, Ti in a human mouth was not directly measured, so we need to attempt to perform MRI carefully on patients with Ti implants.



For Beryllium, it appears again to be the perfect additive, like tungsten to steel. It was the choice for objects which humans would send into outerspace.


In structural applications, the combination of high flexural rigiditythermal stabilitythermal conductivity and low density (1.85 times that of water) make beryllium metal a desirable aerospace material for aircraft components, missilesspacecraft, and satellites. Because of its low density and atomic mass, beryllium is relatively transparent to X-rays and other forms of ionizing radiation; therefore, it is the most common window material for X-ray equipment and components of particle detectors. When added as an alloying element to aluminiumcopper (notably the alloy beryllium copper), iron, or nickel, beryllium improves many physical properties. For example, tools and components made of beryllium copper alloys are strong and hard and do not create sparks when they strike a steel surface. In air, the surface of beryllium oxidizes readily at room temperature to form a passivation layer 1–10 nm thick that protects it from further oxidation and corrosion. The metal oxidizes in bulk (beyond the passivation layer) when heated above 500 °C (932 °F), and burns brilliantly when heated to about 2,500 °C (4,530 °F)




It would be the conclusion that these metatron revelations, are craft designed for moving these clones through interdimensions, the greys to be exact, as they must not be durable or more to the point, like big foot, a ship is required to maintain presence as otherwise these creatures slip back through these portals. Think of it as a soul not staying in Heaven and popping back into a body in NDE events.

The reality comes  down to, if this material is what would work for something like this, and it does, then one must consider the reality and the science could be of value to be exploited

Am highly interested in the power generation or absorption of energy and directed is engaged in.

More for future posts if I have time.


agtG